Blog

1st, attention to a careful study of windows and doors sealing performance According to the experts in the selection of aluminum doors warn owners pay particular attention to its sealing performance when choosing aluminum doors with mosaic glass, especially for hollow glass design of aluminum windows and doors products. Because if the door and window […]

Due to excess capacity and constantly increasing price pressure endangering their business, European aluminum suppliers are growing uneasy. The companies blame China for their misery and accuse Chinese firms of flooding the global market with millions of tons of the metal at dumping prices. “The European aluminum industry is looking to China with some concern,” said

Aluminum decreased 9 USD/Tonne or 0.53% to 1,688 on Thursday November 17 from 1,697 in the previous trading session. The Aluminum changed -3.71% during the last week, +1.66% during the last month and +14.64% during the last year. Historically, Aluminum reached an all time high of 3271.25 in July of 2008 and a record low

Data source: http://www.world-aluminium.org/statistics/#data

Heat treating processes for aluminum are precision processes. They must be carried out in furnaces properly designed and built to provide the thermal conditions required, and adequately equipped with control instruments to insure the desired continuity and uniformity of temperature-time cycles. To insure the final desired characteristics, process details must be established and controlled carefully

Aluminum and its alloys can be joined by more methods than any other metal, but aluminum has several chemical and physical properties that need to be understood when using the various joining processes. The specific properties that affect welding are its oxide characteristics, its thermal, electrical, and nonmagnetic characteristics, lack of color change when heated,

The specific demands made on welded constructions require the application of the most suitable alloy. Pure aluminum and the Al-Mn alloy are still in use for the construction of containers and chemical appliances owing to their favorable prices and good corrosion resistance, wherever the demands made on the mechanical resistance are not excessive. Typical alloys for the manufacture of vessels and containers, and indeed as welding materials, are the non-heat-treatable alloys Al-Mg or Al-Mg-Mn, which still have a medium resistance in the soft state.

Heat treatment is the aluminum material on a certain medium, heated to a suitable temperature, holding at this temperature for a period of time in the future, and the use of different speeds for a cooling process, the aluminum material is the most important process steps. Today aluminum factory here on a brief introduction of

Aluminum owes its excellent corrosion resistance and its usage as one of the primary metals of commerce to the barrier oxide film that is bonded strongly to its surface and, that if damaged, re-forms immediately in most environments. On a surface freshly abraded and then exposed to air, the barrier oxide film is only 1

Extruded Aluminium Sections Aluminum extrusions are linear aluminum products highly valued in a wide spectrum of structural applications due to aluminum’s high strength-to-weight ratio and the cost effectiveness of the metal extrusion process. Like other types of metal extrusions, extruded aluminum is either hot extruded or cold extruded through a die, shaping aluminum stock into